New Roof Construction

The more you know about the different types of flat roofs, how they are made and the materials they use, the more informed your decisions will be and the easier it will be to make the right one.

A Renoteck specialist will be able to answer to all your questions and help to make informative decision regarding your commercial project needs.

Renoteck Roofing has experience and expertise with the following types of commercial roofing applications:


TPO

TPO Roof

  • Popular choice in “green” buildings.
  • These roofs are highly resistant to UV rays, ozone and chemical exposure.
  • Highly reflective design options also effectively trim building cooling costs.
  • Resistant to ponding water
  • Less flexible and more flammable than PVC

Roofing Methods

  • Mechanically Attached
    Membrane is mechanically attached to the structure with mechanical anchors
  • Fully Adhered
    Membrane is bonded directly to the insulation board or other substrate
  • Point-Affixed
    Plates are installed at fixed intervals & the membrane is welded to the plates.

EPDM

EPDM Roof

  • Outstanding resistance to heat, ozone, polar substances, and weather-born stress.
  • EPDM systems consist of a single-ply membrane that makes a roof completely waterproof and does not pollute run-off rainwater.
  • All seams glued down
  • Requires less installation equipment for a faster, less expensive installation

Installation Methods

  • Mechanically Attached
    Membrane is attached to the structure with mechanical anchors
  • Fully Adhered
    Membrane is bonded directly to the insulation board or other substrate
  • Ballasted
    10-12 pounds per sq. ft. of rock ballast hold the membrane into place. Requires structural engineering approval.

PVC

PVC Roof

  • PVC roof systems are lightweight and highly reflective.
  • PVC roofs are the consistent choice of eco-friendly contractors and building owners.
  • Heat welded no open flame creates extra strong seems.
  • Resistant to ponding water
  • PVC is a good choice for facilities with grease, oil, and chemical concerns. PVC roofing systems have a long history of meeting the most stringent codes across the industry, and are a good choice for durability and efficiency.

Roofing Methods

  • Mechanically Attached
    Membrane is mechanically attached to the structure with mechanical anchors
  • Fully Adhered
    Membrane is bonded directly to the insulation board or other substrate
  • Point-Affixed
    Plates are installed atfixed intervals & the membrane is welded to the plates.

BUR

BUR Roof

  • BUR roofs can be composed of two, three, four or more layers – the greater the number of layers, the more durable the roofing becomes.
  • The installation process consists of mopping hot bitumen material onto the surface of the roof and felt is then applied on top of that.
  • There are also cold-applied adhesive bitumen material available, which eliminates the need for steaming hot bitumen. This is a safer option that retains the same waterproofing and durability of traditional hot bitumen.
  • Ponding water will damage the roof

SBS

Bitumen Roof

  • A standard modified bitumen roof system is a two-ply system applied in rolls that overlap the edge of the previous roll.
  • Modified bitumen roof systems can be installed with the common torch method, asphalts, or cold adhesives.
  • Standing water will damage the roof
  • Withstands traffic and wear better than BUR roofs


Get A Roofing Quote

Your Name

Your Email

Your Phone

Service of Interest

Prove you're human: captcha


  • BBB Accredited
  • Licensed, Insured and Bonded
  • 10 year labor warranty
  • No Sub-Contractors
  • Top Quality Workmanship
  • Residential & Commercial
  • Free Estimates